Having a busy week at work so there's not much evening activity going on cart wise. We did spend a couple hours last night adding the composites to the center chassis former.

It was going to be a bit of a pain in the ass to use the carbon tow in this short space so we grabbed a few yard of unidirectional carbon fabric and wrapped with that. We again finished over that with one layer of 5.8oz glass to protect the brittle carbon.

Next up ... I'm going to weld up and install the front steering mechanism and wheel support. On it's own this will add some stiffness to the front portion of the chassis and after it's installation we will determine if the front former is just stiff enough, or needs composite layers added, or can be removed completely.